Gulf Automation Systems Co.

FIBARO RGBW

gulfautosys

Unearthly potential

Unleash your fantasy decorating a living-room or bathroom. Create illumination effect to match weather conditions, your mood or a special occasion. 3 million colours on hand, waiting for your ideas!

Fibaro RGBW Controller is one of a kind, advanced wireless 4-colour LED strips controller. Apart from traditional RGB channels it, also supports the additional white light channel, which allows for adding pastel colours to the colour scheme. The device may control up to four analogue sensors.

RGBW

Fibaro RGBW Controller controls three as well as four colour LED strips giving you milions of colours of light.

Analogue sensors

Fibaro RGBW Controller has four analogue inputs supporting any sensors, e.g. light sensors, wind sensors, pressure sensors and potentiometers operating within 0-10V range.

Four output channels

Four output channels allow for connecting and independently controlling each of connected light sources.


Home..
just how you like it

LED diodes are widely used in home lighting. LED lighting perfectly suits modern design, helping you feel warm and peaceful depending on your mood.

LED’s are extremely energy efficient and relatively inexpensive. As a result they are more frequently used in interior design, to accent certain design features with a delicate light wisp.

Choose your favorite color

We have created an intuitive interface for your Smartphone or tablet, using which choosing your favorite color for each lighting zone is just a child’s play. Favorite color bar will change coloring in a living-room or child’s room like a touch of magic wand. Lighting programs slider will help you relax starting calming pastel color transitions, harmonizing with music playing in the background. There’s a magic ball as well, letting you choose any color you wish. You are a wizard of your well-being.

Create your own colour compositions

We designed four lighting scenes with amazing animation. Immerse yourself in an atmosphere of love and warmth with light simulating lit fireplace, or feel the magic of inspirational morning in the colors of the morning dawn. Recall memories of warm summer weather storms and check the unique magic of colors in the a simulation of a storm. All dangerous situation detected by FIBARO system will be additionally enhanced by visual effects, particularly desirable for the hearing impaired.

Good mood provider

Enchant your interior

After hard day’s work you deserve to relax. All you have to do is start a programmed relax scene with a push of a button. Your intelligent home will do the rest – adjust the temperature and humidity, music volume and lighting scenes, with help of analogue sensors connected to the module. Pastel colors will help you calm down and forget about the stress. Thanks to Fibaro RGBW Controller you will experience your own haven of peace. Feel warm in your house thanks to Fibaro RGBW Controller.

House alerts with colors

Your intelligent house reacts to anything happening around and informs you about it with colors of light. Use Fibaro RGBW Controller not only to arrange interior lighting schemes but also to inform you about any event you can imagine.

Thanks to four analogue inputs, Fibaro RGBW Controller may be connected to four independent analogue sensors operating in 0-10V range. Use analogue sensors support to create bathtub illumination informing of water temperature with a colour. Adapt living-room lighting to conditions outside. Help your Fibaro Home Center decide whether to start garden watering depending on signals coming from soil moisture sensors and light intensity sensors.


Alarm
door sensor
Twinkling Patrol

Twinkling RGB rays in the garden will notify your neighbors and emergency services on the presence of an intruder. Feel the comfort of safety


Unbelievable possibilities

of analogue sensors

Fibaro RGBW Controller supports up to four analogue sensors, providing Fibaro Home Center 2 with many more information based on which Fibaro System gives you comfort and security.

Thanks to information from analogue sensors, Home Center will roll the awnings to prevent them from being torn by wind, close the windows when it rains or gets cold. Analogue sensors will let you experience a true home intelligence.


weather stations
soil
moisture

Start garden watering
when the soil is actually dry

Taking care about a garden is a real challenge. Thanks to Fibaro RGBW Controller, having a richly green, dense lawn is easier than ever.

Connecting a temperature sensor and a soil humidity sensor to Fibaro RGBW Controller will ensure your lawn is watered when necessary. Using information from those sensors Fibaro Home Center 2 will not waste any water on grass wet after morning rain. Enjoy a beautiful, healthy lawn without an effort.

Recommended sensors



Moonlight will help you save electricity

Garden lighting not only looks good after dark but it also increases you and your family safety. Garden lights intensity may be adjusted to match ambient lighting intensity with a suse of light sensor connected to a Fibaro RGBW Controller. This way, when sun sets late in the evening, garden lights will turn on only after sunset. And when full moon shines, garden lights will turn on with minimum output to save electricity.

Recommended sensors


light output
garden lighting

air
quality
humidity
temperature
pressure

Best child care

Use Fibaro RGBW Controller to continuously monitor conditions in your child’s room. Connect four analogue sensors and monitor air quality, humidity, pressure and temperature. You will ensure perfect conditions for your child to sleep and grow up.

Recommended sensors



Fish tank under control

Fish tank is an excellent addition to any interior. Let’s you place a fragment of true underwater nature in your living room or bedroom. However, fish tank inhabitants need not only food for living, but also water of specific parameters.

Fibaro RGBW Controller supports sensors which let monitor water temperature, CO2 level crucial for proper plant growth, pH level appropriate for fishes or calcium levels. Fibaro RGBW Controller allows for monitoring four parameters which notify the user if any changes occur by push/sms/email or flashing light colors.

Recommended sensors



* Jumo dTrans CR02 versatile water parameters transmiter

77°F
temp

sensor

27mg/l
CO2

sensor

8°n
pH

sensor

410mg/l
calcium

sensor


Garage parking master

Fibaro RGBW Controller will help you park a car so that it perfectly fits your garage, and you could get out and unpack the luggage without scratching the paintwork.

You can create lighted parking guidance in your garage using color LED strips and analogue proximity sensors. Illuminated color will change depending on distance to the walls.

RED COLOUR

RGB Combined with Fibaro

20cm

distance from wall


4 – channel dimmer

for 12/24V light sources

Fibaro RGBW Controller allows for managing four independent light channels. It’s the world’s only wireless controller allowing for dimming up to four connected light sources independently. RGBW Controller’s versatility ensures correct operation of 12V and 24V light sources as well, without any modifications. This way you don’t have to observe the voltage of connected light sources.

Kitchen Lights

Choose desired kitchen illumination to match your current activity. Whether you are relaxing reading a book, listening to music or spending time with friends, choose illuminated colour manually or use one of predefined colour schemes.

Temperature determines illumination

Illuminate heated floors, wash bowls, showers with LED strips that change colours depending on temperature. Staggering effect!

Sensors determine illumination

Use sensors to match light intensity to conditions outside. Lights may be turned on automatically when it starts getting dark and it’s intensity will increase after the sunset.


Wall switches

Set desired light colour manually, mixing colours using wall switches. Start other devices automatically, depending on lighting colour set.

Potentiometers

Potentiometer is a rainbow in your hand. Choose any colour you wish to suit your mood.

Fibaro Interface

3 million colour possibilities can be selected from the palm of your hand on your mobile device anywhere in the world.

Analogue sensors

Light colours match bathtub water temperature or weather outside? Connect wind or temperature sensor and make it happen


Live power consumption monitoring

RGBW Controller allows you to manage and monitor energy consumption connected to the LED strips.

Four channels allow for total or independent measurements of energy consumption. When connected with the HC2 you can check the live real-time power consumption and review usage history.


Wireless update*

You can upgrade the device wirelessly, by choosing that option in Home Center 2, anytime a new firmware is available. You don’t have to disconnect it from a wall socket and waste time connecting it to a computer. Just press update button and enjoy the time with your loved one.

 

*The update function will be available soon.


Download manual

Click to download the RGBW Controller manual

FIBARO Door/Window Sensor

gulfautosys

Door/Window Sensor

The Door/window sensor is a battery powered reed sensor. Its operation under the z-wave standard guarantees compatibility with the Fibaro Intelligent System and other Z-Wave gateways. The sensor expands the capabilities of the system by monitoring the opening of doors, windows and garage doors. It is used in automatic light control, access control and home security systems. Installation of the Door / Window Sensor in your home increases the safety and comfort of its inhabitants. It also eliminates the risk of high fees for heating or air conditioning. In addition, the module can be equipped with a temperature sensor, and use the built-in binary input.

Functionalities:

The Door/window sensor combines the functionality of 4 devices:


Reed
sensor 


Binary
input 


Temperature
sensor 


Scenes
switch 

1) Reed sensor

 

Installation of reed sensors in your home will provide the HOME CENTER 2 with additional information, which can be used to control other components within the Fibaro system. The module checks the condition of the opening and closing of any window or door. An opened window canl prevent the system from launching heating or air conditioning in a particular room. Therefore, you will not be exposed to unnecessary costs. When mounting reed sensor on the front door, you can turn on the lights automatically when opening the door and/or run a pre-programmed scene e.g. “Return home”. In addition, the Door / Window Sensor can be used as an unauthorized intrusion alarm sensor. These are just some of the capabilities of the Door / Window Sensor.

Applications:



Door & Windows

Garage
door 


Gates

2) Wireless entry sensor

 

The Door/Window Sensor may be used together with the HOME CENTER 2 to control other features. Once the Door/Window Sensor input is connected with a typical wall switch it can control other devices within the Fibaro system. The idea behind it is to enable the user to place a previously unplanned switch in a chosen location without ever having to wire cables. The number and location of existing switches no longer limit the arrangement of your interior. The Door/Window Sensor can easily and non-intrusively take up the role of this element of the home electrical system.

3) Temperature sensor

 

The Door/Window Sensor module also works with the DS18B20 temperature sensor (sold separately). This tiny element is installed in the module inputs and added to the Fibaro System. Its installation is very easy. Simply place three leads into the inputs and secure them using the screws. The temperature sensor can greatly expand the number of features available with the Home Center 2. The reed sensor feeds the Fibaro System with information about an open door or window allowing the temperature sensor to collect the necessary data for automatic ventilation of a room without excessive cooling. The temperature sensor may also be used during the planning of a temperature profile at the heating panel.

*DS18B20 sensor is sold separately

4) Pre programed scenes switch

 

The Door / Window Sensor has a unique feature in which it can automatically trigger pre-programmed scenes. To start a scene on the level of electrical installation has been difficult until now.  It required a Fibaro module, previously installed in an electrical device, which would then start a scene. This solution was not intuitive enough so to meet customer demand we gave the Door / Window Sensor the additional functionality to start scenes. Simply connect a traditional light switch or any sensor (e.g. motion detector) to the FIBARO module to trigger a pre-programmed scene to start. Therefore you can create a wireless, battery powered switch for multiple devices ready to work within a short time.

Applications:



Button “leaving home / homecoming”  as on/off in the pre-defined devices.

Connect a traditional switch to the FIBARO module and indicate a pre-programmed scene in HC2 to start.  Make a number of clicks on switch an indicator to run a specific scene.

Switch, which in conjunction with the RFID reader (e.g. car module) will open the gate to the property, raise the door to the garage, start ventilation inside, turn on lights  on the driveway and the road to the house, and finally closes the gate.

Extremely compact

The Door/window Sensor is extremely compact and is the smallest unit of this type available on the market. Its extremely lightweight and thin design makes it almost invisible on any window and door.

 

Easy and fast installation

Installation of the module is very simple. Just remove it from the box, open the case, remove protective film on the battery and stick it on the surface with the double-sided tape (included). Low power consumption enables up to 2 years of battery life. The system will notify you in advance if battery becomes low. Current battery consumption is always visible in HOME CENTER 2 configuration panel.

Intuitive installation

The user-friendly interface ensures an easy and intuitive way of adding devices to Fibaro System. Door/Window Sensor installation is extremely simple and does not exceed 3 minutes.

Adding sensor to Home Center 2

1) Go to the DEVICES section and click the “Add” button.
2) Home Center 2 will be set to LEARNING MODE.
3) Click the button at the back of the sensor’s casing.
4) Your Fibaro Door/Window Sensor is ready to operate.

 

Wireless update*

The FIBARO Door / Window Sensor has been designed to receive wireless software updates. Every upgrade of the device takes place seamlessly and without any action. Full automation of the software update is done with comfort and safety guaranteed by the Fibaro team.

 

Customized

The Fibaro Door / Window Sensor is available in seven colors. Select the best color match to your home interior designs and enjoy the undisturbed beauty, security and comfort.

 


Download
manual

Click to download the door/window sensor manual.

 

 

FIBARO Flood Sensor

gulfautosys

The most beautiful and functional flood sensor ever made

Fibaro Flood Sensor – futuristic design, compact size, and a wide variety of additional functions. Fibaro Flood Sensor is simply remarkable! This unique device can guard you and your family’s safety. With its advanced technology and precision, the Fibaro Flood Sensor will alert you of a threatening flood, or a rapid temperature rise or drop. All while being maintenance-free without the need for professional installation.


In the beginning
there was a drop of water…

Water is the most common substance in the world. It gives life, but it can also take it away. Water allows us to enjoy each day and sustained a great feeling of refreshment. The importance of this substance, covering 70% of the world, is so great it inspired us to pay her tribute. The design of the Fibaro Flood Sensor was inspired by the perfect water drop. Every single drop, just like the modules of our system, can exist individually or they can connect with one another, forming a coherent ecosystem. The shape of a water drop is perfect and flawless, therefore our sensor’s enclosure had to look the same. The Flood Sensor is made of high quality, white, glossy plastic and is perfect in every detail. It’s design is extremely functional and the technology gives you endless possibilities.


Perfection in every detail

The Fibaro Flood Sensor is the most technologically advanced, most functional, yet amazingly aesthetic flood sensor available in the world today. Before design process started, Fibaro engineers tested most of the battery powered flood sensors offered. None of them met our expectations. That’s why we started working on our own design, meeting high expectations of our customers. That’s how the Fibaro Flood Sensor was born – a flood sensor equipped with new technology providing safety for you and your family. All of wich closed in a miniature, compact enclosure.

TILT SENSOR

Detects tilt and movement over 15 degrees. It will also alert you of any attempt to move or tamper with the device.

ALARM SIREN

Built in alarm siren will help you react quickly in case of a flood, rapid temperature change, or attempt to tamper with it.

TELESCOPIC PROBES

Fibaro Flood Sensor is the only one in the World to perfectly work on uneven surfaces thanks to gold telescopic probes, which are flexible enough to compensate for uneven surface levels.

IN / OUT

Input terminal allows for connecting an external probe and installing the sensor in any location. Output terminal allows for connection to an alarm system.

VISUAL INDICATOR LIGHT

Aside from the alarm siren, the device can alert you of a threat using colour displays from the built in RGB diode.

TAMPER PREVENTION

Specially designed enclosure contains a tamper button, protecting it from being opened unintentionally.

BATTERY POWERED

A single battery is enough to power the Sensor for 2.5 years.*

TEMPERATURE SENSOR

Built in temperature sensor may be used to manage a floor heating system or serve as a fire alarm sensor, by detecting rapid temperature rise.

Patent Pending

*by using the default settings


One sensor, plenty of possibilities

Our Flood Sensor is a totally uncompromised device. It can be battery or VDC powered, depending on the operating location. The Sensor will work on 12 or 24 VDC. Thanks to the output terminal, Fibaro Flood Sensor can be integrated with any alarm system as well. Input terminal allows for connecting an external contact probe for using the Flood Sensor in places with limited accessibility.

Hard wired Power
or battery

You can power the Flood Sensor by 12/24 VDC or a battery which will last 2,5 years.

Alarm systems
integration

The Sensor allows for integration with almost any available wired alarm system on the market.

Wired
or wireless

The Sensor allows for sending alarm notifications via wires or wirelessly.

*fot. Satel – www.satel.pl


Dual Tamper protection

Our flood sensor is beautiful, which makes it desirable to grab and take a closer look. We know and completely understand this. Any movement or relocation can stop the sensor from serving its role, that’s why it will be detected thanks to the built-in motion detector. Any attempt to open it will be detected resulting in a report being sent to the main controller as well. Mind you, this is a very important device, bearing huge responsibility, monitoring our home and helping us react quickly.

15°

Tilt sensor


Wherever needed

It’s crucial to quickly detect potential threats of a breakdown. With the Fibaro Flood Sensor’s compact size, various powering and alarm system communication possibilities, you are guaranteed to be the first one to know about a breakdown and flooding threat. The Sensor may be installed in hard-to-reach places. It can work in any location you need. Even if it can’t be installed in the precise spot needed, you can always connect a wired probe to detect the leak in its best probable location.

*Wired probe is not included with the Flood Sensor.


Gold telescopic probes

Fibaro Flood Sensor is equipped with three ultra sensitive probes, plated with 24-karat gold. Sophisticated telescopic mechanism allows for placing the Sensor in any location, even on an uneven surface. Gold plating prevents the probes from corroding and provides the best precise liquid detection. All this allows you to respond quickly, before the breakdown outcome gets serious.


Opened enclosure alarm

For safety reasons, Fibaro Flood Sensor’s enclosure is protected from being opened, turned off or destroyed. Detecting any tampering will result in household members being notified by SMS, Push or e-mail.


Visual Colour Display

One look is enough to find out what happened, thanks to the coloured indicator light. Depending on the Flood Sensor’s built-in LED illuminated colour, you will know whether the Sensor has detected water, or a decrease / increase in temperature. With its built-in Z-Wave range tester you can easily determine whether the place you chose for the Sensor allows for communicating with the main controller or maybe you will have to use an external wired probe, to ensure the Sensor’s proper operation.

Flood alarm

Water detected

Out of range

Outside Z-Wave network

Direct range

Within Z-Wave network

176°F

Excessive temperature

70°F

Optimal temperature

30°F

Temperature too low


Safety first

Even before our washing machine and bathtub give us a small flood, various plumbing gives us some warnings, so we should keep a closer eye on them. Small leaks by the bathtub drain or a tiny puddle next to the washing machine drain, definitely should peak our interest. However what to do when the tub is already built in, and leaks are too small to be seen? It’s better to be safe than sorry, and set up a Fibaro System. Flood Sensor is a perfect solution in any location that we might suspect a leak to occur, even if access to the location is very difficult. Such a place might be in a built-in bathtub by the drain, built-in washing machine or dishwasher. Install the Fibaro Flood Sensor in hard to reach areas and have peace of mind. If even the smallest leak will appear, you will get advanced warning on your smartphone and you’ll be able to call an expert.

* In case of an alarm, immediate information about the flood goes to your phone and tablet.


Difficult to submerge

The sensor is designed to work in the toughest conditions. It works properly at low or high temperatures, from 14°F* to 203°F*. It can handle any type of flood, whether it be fast or slow. The enclosure is waterproof, allowing for direct contact with the liquid and prevents submersion which would cause it to stop communicating. Only this type of sensor can guarantee your safety.

*By using the proper battery.


Rapid response

Flooding threat detected by the Fibaro Flood Sensor may result in Fibaro System automatically responding by closing water supply to prevent damage. It’s enough to install a solenoid valve in your hydraulic system. The System will be able to operate it automatically via Fibaro Relay Switch connected to it. The Fibaro Flood Sensor in couple with a solenoid valve and a Relay Switch module, means a peace of mind for you, and safety for your home.

“…shut down the water supply…”


Underfloor heating

Floor heating is an amazing comfort for people and unfortunately a nightmare for the individual to control correctly. It is very difficult to determine the optimal temperature and turn off the heating at the right time to avoid uncomfortable temperatures. Thanks to the integrated temperature sensor, the Fibaro Flood Sensor will help you manage your floor heating. The Fibaro Home Center 2 will ensure that the temperature is ideal for your family’s comfort, all while being as energy efficient as possible.

82°F

floor temperature

Did you know that…

Fibaro has a Universal Sensor that can be combined with an appropriately secured DS18B20 temperature sensor which can then be mounted under the floor surface and even covered with concrete.


It will prevent icing

Because the Fibaro Flood Sensor has no problem handling the harshest conditions, You can easily use it in front of Your house to control the temperature of your driveway. If your driveway is sloped, even the smallest amount of ice can cause your car to skid when you are leaving your garage. Icing can cause a lot of unnecessary accidents. The Fibaro Flood Sensor was perfectly designed to work with warming mats to prevent even the smallest formation of ice around your house.

30°F

Temperature


…and helps you detect a fire

It’s not afraid of extreme temperatures. Any sudden temperature change will trigger an alarm in the control panel* and the household will be alerted about it immediately on their mobile device. Thankfully the Fibaro Flood sensor can help detect a fire in its early stages, especially if there are any unknown problems with your current fire detectors. The Fibaro Flood Sensor is the perfect additional level of support for your fire alarm system.

176°F

Temperature

A Perfect Combination

Advanced device associations and extended scenes will allow Your Home Center 2 Control Panel to independently take appropriate steps immediately after detecting a risk of flooding or fire. Even after the smallest liquid detection near the washing machine, the Flood Sensor will send a signal to a Relay Switch which will cut off the solenoid water valve, and disconnect the washing machine which is connected to a Fibaro Wall Plug. In case of fire detection, a Relay Switch disconnects the solenoid gas valve, the control panel ensures lights that mark your escape route are illuminated, and the ventilation system runs at maximum level to get rid of the smoke. These are just some of the possibilities when you associate modules and devices in the Fibaro System.

…reaction adjusted

to your preferences…


<

Wireless Update*

Fibaro Flood Sensor has been designed to get firmware updates automatically without any need for action taken from the individual user. Automatic software updates gives you convenience and piece of mind with the Fibaro System.

 

*The update function will be available soon.

Update

in progress


Built in range tester

For your safety and security, and to make sure the flood sensor is working properly, it has been equipped with a built-in Z-Wave network range tester. Communication in wireless Z-Wave mesh network lets you stay connected with the control panel over a long distance and through indirect connectivity, using other Z-wave modules. Built-in LED will allow you to easily check if the sensor has a good range and can communicate with the Fibaro System or requires a different location.

Direct
Routing
Out of range

Download manual

Click to download the Flood Sensor manual

See the movie

Click to see how the Flood Sensor modul works.

FIBARO Motion Sensor

gulfautosys

Inspired by nature

Beauty comes from nature, advanced technology from people. FIBARO extracts the essence of both and creates perfection. In conjunction with the immutable laws of architecture and the latest technology, the FIBARO Motion Sensor was created – your eye on the home. Inspired by the beliefs of the ancient Egyptians, we have designed the world’s smallest, wireless motion sensor and shaped it like a cat’s eye.

For centuries the cat symbolized a guardian of people and the home. Additionally, it is known as a predator with excellent eyesight, above average hearing and exceptional vigilance. The FIBARO Motion Sensor is as sharp as a cat’s eye; it sees wider and farther so it can notice what you are unable to see. It has a wide field of view, long range and is incredibly vigilant. Not only will it make your life more comfortable, but it will also make you feel safer.

Larger area
motion detection


71°F
Temp sensor
540lux
Light sensor
Level
Acceleration
Breached
Motion sensor

Multisensor

In taking up the challenge of innovation, we have developed an intelligent work of art that combines four useful functions to give you MORE. This tiny device, apart from detecting movement, measures the current ambient temperature, intensity of light and vibrations thanks to its built-in accelerometer.

The FIBARO Motion Sensor expands the comfort of your reality. Create custom scenarios, so you can forget about nasty situations and enjoy the luxury of safety – its watchful eye will detect any intrusion or attempted sabotage, fire or other threats. Now you know and see more!


Colour announces movement and temperature

Motion and temperature The multicolour LED pupil of the FIBARO Motion Sensor informs family members if it has detected any motion or the current temperature of a room. Set the colour and its intensity to your liking and, as soon as you enter a room, you will know what the temperature is there

Temperature
Temperature
Temperature

Small is beautiful!

The world’s most advanced technology has been enclosed in a flawless white casing. With a diameter of less than 44 millimetres, you will love it at first sight!


Intelligent object recognition

One of the main features of the FIBARO Motion Sensor is its excellent ability to detect even the slightest motion; nothing escapes its attention. Given that all rooms are different, you can also adjust the Motion Sensor’s sensitivity to suit its location in the house, your individual needs or a particular situation.


I see you

Even as you stand far away and little you move
max sensitivity

Watch your home and your loved ones

Wondering what’s going on at home when you are away? While you are at the office, or on a business trip, the FIBARO Motion Sensor will watch your home and protect your loved ones. In addition, the FIBARO Motion Sensor monitors how much time someone spends in a room. So you will be informed when your kids spend most of their time watching TV in the living-room instead of doing their homework in their rooms, and then you will be able to turn the TV off remotely.

9:55
Motion in the dressing
room detected.

Count the guests

After installing FIBARO Motion Sensors on both sides of the entrance to your home, you will always know how many people entered or left your house, or a given room. No need to worry about a teenager being home alone. The FIBARO Motion Sensor will tell you what time he or she went out, came back home, or how many visitors he or she had.

Someone
approaching
One person
entered the room

Guests arrived? The system will look after them.

Family meeting, dinner with friends, or a party – the FIBARO Motion Sensor will make sure your guests feel comfortable. Once the system knows there are more people in the house, it will turn the ventilation on, so there’s enough fresh air.

Speed up the ventilation,
I have deteced increased
traffic in the living room.

OK,

Speeding up
the ventilation

+20%


It learns your habits

The FIBARO Motion Sensor’s ability to analyse your habits allows the system to take certain actions automatically for your comfort and savings. You can connect two controllers operating within one FIBARO System to manage your home, based on the information collected by the controller installed in your office. As long as the Motion Sensor installed in your office recognises you are still there, the controller installed in your house reduces the heating temperature until you return.

Welcome to your own office. Reducing the temperature and turning off all unneeded devices at home.

OFFICE

HOME

The house wakes up with you

The FIBARO Motion Sensor makes every morning wonderful. When you wake up, the sensor will start a pre-programmed wake-up scenario. The temperature will be set how you like it, windows will open to give you a breath of fresh air and blinds will open to let the sunshine in. Meanwhile, the smell of fresh ground coffee will waft from your kitchen…

It reminds you to arm the alarm

Did you leave the iron or lights on when leaving in a hurry? Forgot to arm the alarm? No worries! The FIBARO Motion Sensor will detect the lack of motion in the house and inform the Home Center about it. Then the pre-programmed scenario will notify you, or automatically arm the alarm, close the windows, turn off the lights and all unnecessary devices, and lower the heating temperature.

 

There is no one at house
since 15min.
Arm the alarm?

Mobility is its greatest feature

The FIBARO Motion Sensor is powered by a long lasting battery, allowing the device to operate for up to three years. The absence of hard wires in favour of wireless Z-Wave communication with the main controller, enhances the device’s ability to operate anywhere inside your house.

Attach it anywhere

The clever holder allows you to put the sensor anywhere, or fix it permanently to a wall, ceiling or other surface. You can change the sensor’s location whenever you need to.

For the youngsters…

The FIBARO Motion Sensor will wait and turn off the bedside lamp after your child falls asleep. Your little one will fall asleep peacefully, without stress, and you won’t have to worry about the bills.

When she wakes up I will turn the
light on with 10% brightness and
play her favourite lullaby.

Tamper protection

To keep you and your family safe, the FIBARO Motion Sensor has built-in tamper protection. Any attempt to relocate or change the sensor’s view angle will trigger the alarm and the system will inform you by sending a message to your mobile devices.

Detects earthquakes

Earthquakes happen quite frequently, and even a minor one can be highly dangerous. Thanks to its built-in accelerometer, the FIBARO Motion Sensor will detect even the slightest vibrations, which you would not be able to feel yourself. A notification sent by the system will warn you against the impending threat, giving you time to take the necessary precautions.

Temperature correction

A comfortable temperature is crucial for our well-being. The FIBARO Motion Sensor has a built-in temperature sensor to meet all your requirements. The temperature at ceiling level is different to that close to the floor. All you need to do to get the heating temperature right is to measure the temperature at floor level, using any sensor, and tell the Motion Sensor to compensate for the difference.

Great cooperation with other devices

The FIBARO Motion Sensor works perfectly in any situation and provides you with endless possibilities when integrated with other devices. In the evening it will tell the system to turn the lights on immediately after the motion is detected. Consequently a camera will be able to transmit clear image to your mobile phone. You can relax, FIBARO System will guard your home.

I saw movement
Camera: record the image.
Turn on lamps,
because it is too dark for the camera.

 

Download manual

Click to download the Motion Sensor manual

 

 

 

See the movie

Click to see how the Motion Sensor modul works.
 

 

FIBARO Swipe

gulfautosys

Now it’s your move

It’s really easy. Raise your hand and swipe it down to turn off the lights. Move your hand up for the color LED lights to turn on and light up the room. Swipe to the right if you want to turn the TV and other electronics off. What is your next move?

Designed to delight

The world’s most innovative technology hidden beneath a beautiful, smooth elegant casing.
SWIPE is simply perfect in every detail so it impresses in every possible way.

Black / White

white version

*coming soon

Quality and precision

Beautiful, just like you

When displayed, SWIPE can be used as a beautifully designed picture frame and allows you to
easily change photos whenever you want. It takes just a moment to remove the front panel and
you can relive the memories that bring a smile to your face.

Stationary and mobile

SWIPE can be powered by battery (4xAA) or wire (Micro USB), giving you ultimate flexibility.

It matches any interior

SWIPE easily adapts to the décor of any room. You can put it in the living room, kitchen,
bedroom or in the office – it doesn’t have to be a typical household device.

Life whitout SWIPE? Impossible!

Gestures play an important role in our lives. A handshake or thumbs up can say more than
hundreds of words. Gestures are often used unconsciously and naturally. It will be no
different using gestures to manage your home.

Put in on display…

You can put it on the dresser with your favorite family photos or hang it on the wall
among other photographs. It not only looks beautiful, but also reacts to your gestures.

click to see

… or hide it!

SWIPE doesn’t have to be used as a decoration. You can hide the device under a kitchen
counter, coffee table or desk. SWIPE is magical, so it reacts even through those surfaces!
SWIPE your hand over it – that’s enough to turn on the lights or radio.

Hidden under the top

SWIPE works through the table top! Make one magical
gesture and… change your world.

Open the doors to your imagination

SWIPE is a technical masterpiece, which can be used in many unconventional ways. How?
It depends on you and your imagination. This extremely advanced device has limitless
capabilities for you to explore!

Make life easier

Life can be made easier for the people you really care about. Show them the endless
possibilities of a gesture, without even getting up from the chair: ventilate the apartment,
turn on the heating or boil water for tea. FIBARO SWIPE, with a favorite picture installed,
is the perfect solution for aging people who find modern technology difficult to learn.

Heating:69F° > 70F°

Control audio devices

Volume up, volume down, next song, bass boost…
Wave your hand and have full control over your sound system.

Reach inaccessible places

See how the impossible becomes possible.
Close the skylight windows and blinds with a wave
of your hand. Magic? No, it’s SWIPE.

Smart not only at home

The workplace is called a second home for a reason. It is where we spend most of our time. SWIPE will
help you create a friendly surrounding and make the office as comfortable as your home. Control
blinds, lights or a projector – everything with gestures of your hands.

Hands full of dirt?

You can count on your magical assistant!
One swipe of the hand is enough to turn on the lights without getting the switches or wall dirty. Quick, clean and convenient.

Good morning! Time to get up!

Even Monday morning can be made pleasant. You can prepare fresh coffee and a hot bath
using FIBARO SWIPE, straight from your bed. Reach out a hand and swipe to the left to prepare
your favourite coffee. Move your hand to the right and the bathtub will be filled with hot water. That is
the beginning of a beautiful day, don’t you think?

Wave Goodbye

Going out? With a simple gesture, SWIPE can activate
your ‘Goodbye Scene’, which lowers your shades,
turns off the lighting, and activates the alarm.
There is no simpler solution.

FIBARO Home Center 2

gulfautosys

Home Center 2

Home Center 2 (HC2) is the brain to the Fibaro Intelligence System and can be used with other existing Z-Wave automation devices. HC2 was designed and developed by our engineers, giving us the ability to implement many unique features never seen before in other Z-Wave gateways. HC2 redefines Z-Wave based home automation and introduces real Home Intelligence.

Home Center 2 by Fibaro isn’t just an electronic device. It’s also well designed, innovative and user friendly interface, featuring functions never seen before.

Exclusive aluminium casing

We have put a huge emphasis on styling and quality, so that Home Center 2 by Fibaro pleases you from the first time you look at it. Home Center 2 is made of solid aluminum, making it very elegant in appearance with true innovation inside.

Extremely quick and efficient hardware structure

Intel Atom 1,6Ghz Processor

Thanks to its efficiency, Home Center 2 (HC2) is much, much faster than other Z-Wave gateways currently on the market. The communication within the Z-Wave network has improved dramatically allowing the HC2 to have immediate response to commands sent by the system user.

4GB MLC Recovery Disc

Gives you significantly improved data security thanks to Fibaro’s proprietary approach to data protection. Each Home Center 2 has its own Recovery disc for system backup unique to each gateway. This completely prevents unauthorized access to the system. Another advantage of the HC2 is quick and simple back up recovery securing all of your settings.

1GB RAM,
2GB SLC Hard Drive,

Large memory + fast processor = quick communication between HC2 and Z-Wave devices. The hardware architecture used in the Fibaro HC2 makes Z-Wave based home automation communication faster and unique.

Quick and easy installation

Connect wires as shown in below figure.
Plug the power cord to the POWER and the network cable to LAN port

After ca.2 minutes from connecting to power socket, Home Center 2 is ready to operate. By default, Home Center 2 waits to get an IP address from Your DHCP server. If unsure, hold RECOVERY button for a while when power on. By doing this Home Center 2 will automatically get static IP 192.168.81.1 To access the control panel, type the Home Center 2 IP address in your web browser’s address bar.

New possibilities thanks to Linked Devices

Home Center 2 “Linked Devices” function lets you combine multiple devices into one virtual device with combined functionality – for example 3 heater thermostats plus temperature and humidity sensors. The primary advantage of this feature is the convenience of being able to control multiple devices at the same time at the press of one button. The second advantage is reducing the number of device icons in the user interface.

Great comfort thanks to Devices Panels

The Home Center 2 interface gives you easy control over certain groups of devices responsible for the same functionality – heating, air conditioning and garden watering. Thanks to Devices screen, you can easily schedule operations for these groups of devices based on the day of the week or the time of day.

Geo localization

Home Center 2 gives You another unique functionality – finding Your family members. Now You can always know where are Your children, without the need to call them each 5 minutes. Home Center 2 will get their localization for You.
Home Center 2 shows Your family member
route and current position on a map.
Home Center 2 connects to mobile phones with Fibaro
Mobile Application installed to check their current position.
Fibaro Mobile Application determines
family member localization and
informs Home Center 2 about it.

Advanced Scenes

Home Center 2 offers new approach to scenes. Now scenes may be conditioned on any, user defined variable.

Example Scene 1 “Rain”

If raining:
– close roof windows,
– turn garden sprinklers OFF,
– set “it rained” variable to 1.

Example Scene 2 “Turn garden sprinklers on at 6:00 am”

Each day at 6:00 am check if “it rained” (user defined variable).
If not (“it rained” variable = 0) – turn the sprinklers ON.

Example Scene 3 “Reset variable”

If “it rained” and 12 hours passed from that time:
– set “it rained” variable value to 0.